The Testronics 603d system utilizes a Confocal Chromatic line sensor which projects a total of 180 individual beams (spots) onto the backplane at the same time. The profile (height / depth) data of all 180 beams is acquired simultaneously within 0.0005 seconds, (0.5 mS). The system scans the connector up and down & back and forth, creating a complete 3d profile of the connector, (pins, pin tips, holes, pins in the holes, back drilled holes, etc). +/- tolerences on each pin can be assigned. Because quantifiable measurement data is acquired on each pin, pass / fail decisions are very reliable and repeatable.
Maximum Board Size:
Maximum Board Size:127cm x 76cm (50” x 30”)
2. OptoElectronic Controller
Maximum measuring rate:1,800 lines per second x 180 points per line = 324,000 measured points per second
Number of measured points along a line:180 points in a line
Maximum measuring rate per line:0.0005 seconds per line
3. Optical Head
Line length (x axis):44.75mm (1.76")
Number of points along the line:180
Spot size diameter (for each point):50 microns (1.97 mil")
Pitch (distance between 2 points):250 microns (9.84 mil")
Working distance:36mm (1.4")
Measuring range:2mm (.078")
Resolution:0.5 micron (.0197 mil")
Accuracy:2.5 micron (.098 mil")
4. Stage
X axis:Travel: 127cm (50"), Speed: 15cm (6") per second, Positional accuracy: 2.6 microns (.1 mil")
Y axis:Travel: 76cm (30"), Speed: 15cm (6") per second, Positional accuracy: 2.6 microns (.1 mil")
Z axis:Travel: 15cm (6"), Speed: 5cm (2") per second, Positional accuracy: 2.6 microns (.1 mil")