High performance
Even ultra-low air pressure supply, it keeps high performance ionization to compare with Zapp-II.
Integrated designed nozzle
The point of ion creation is around the tip of nozzle and easy installation with flexible seamless piping. Available length of piping is 100mm or 200mm.
H.V. alarm function
In case high voltage shut down, alarm LED light and alarm output function with non-signaled contact normally open or normally close use.
Cleaning Check [C.C] function
With detecting the abnormal discharge through the discharge emitter, it shows with C.C alarm LED and it links with signal output as normally open.
Input Voltage: DC+24V±10%
Capacity: 2.4VA
Output Voltage: AC 2000 V
Discharge method: High Frequency AC Corona discharge method
Ion Balance Below: ±15V(Distance at 50mm)
Alarm output: MOS FET Relay, Normally Closed contact(NO/NC) (Alarm)Maximum current: 100mA, Voltage: Below 30VDC
Cleaning Check output: MOS FET Relay, Normally Closed contact(NO/NC)(C.C) Maximum current: 100mA, Voltage: Below 30VDC.
Discharge stop input(HV-OFF)-Discharge off: Short circuit to 0V, Discharge on: Open circuit(remained voltage below0.5V)
Ozone level Below: 0.1ppm (Supplied air: 30 litter/min(ANR) at 50mm)*2
Supplied Air: Clean Dried Air
Available air pressure: 0.005~0.1MPa
Air consumption: Maximum 50 litter/min (ANR)
Available environment: 0~40°C / 15~85%RH (without condensation)
Dimensions: 87×18×50mm (W×H×D) only body size
Weight Approx: 78g
Accessories: Manual, Power and Signal cable (2.5m), Nozzle is optional.