The 8600 Frequency Source / Measure GPS Standard has been designed to able to calibrate all functions of modern handheld and bench frequency counters and signal sources.
A high accuracy precision GPS reference frequency of up to 1 GHz is available, with outputs for A-B phase and variable levels for confirming trigger levels of modern counter-timer units
In addition, unlike other GPS references, the 8600 also adds the ability to measure frequencies of up to 1 GHz with high precision, removing the requirement for an additional instrument in your laboratory.
Utilising the latest in GPS reference technology, the 8600 combines both frequency source and measurement into a single integrated solution.
Dual VFD displays provide the user with a dedicated source/measure readout, with direct access to detailed settings and satellite Lock/signal information.
Frequency source to 1Ghz with dedicated 10MHz direct GPS output
A-B Phase output for verification of phase measurement functions of counter-timers
Dual VFD displays for convenience
Temperature Performance | Storage : -5℃ to + 60℃ Operation : 0℃ to +50℃ |
Humidity Performance | Storage : <95%, non-condensing Operation : <80% to 30℃, <70% to 40℃, <40% to 60℃ |
Altitude | Storage / Transit : 12,000m (40,000ft) Maximum Operation : 3000m (10,000ft) Maximum |
Dimensions | Width : 45cm / 17.7 in Length : 44cm / 17.3 in Height : 10cm / 3.9 in |
Weight | 8.5 kg 18.8 lbs |
Connectors | Front Panel : 5 x BNC Rear Panel : 3 x BNC 1 x USB Receptacle 1 x GPIB Connector 1 x Female RS232 1 x RJ45 Socket 1 x IEC Mains Inlet |
Line Power | Line Voltage Selectable : 110V / 230VLine Frequency : 50 to 60Hz Line Voltage Variation : -6% + 10% |
Display Information | Type : VFD Number of Lines (Main Display ) : 1 Number of Lines (Secondary Display) : 2 |
Keyboard | Rubber Key |
Fuses | Mains Inlet : 500 mA |
Warranty Period | 1 Year |
Precision 10MHz output synchronised to GPS reference enabling traceable frequency output anywhere in the world with no requirement for external calibration.
• Digitally divided frequency output from 1 Hz to 5 MHz in 1,2,5 steps internally disciplined to GPS referenced 10 MHz.
• 5V peak-peak square wave frequency output from 10 Hz to 2 MHz.
• Variable level sinewave output into 1 MΩ (1mV to 5V) or 50Ω (1mV to 2.5V) from 10Hz to 2MHz.
• High Frequency output from 10 MHz to 1.05 GHz internally disciplined to GPS.
• Frequency measurement from 1 Hz to 1 GHz, internally disciplined to GPS.
• A-B output for verifying phase meters with output from 0° to 359° at frequencies from 1 Hz to 50 kHz.
• Dual VFD Screens ensure clear display of measurements, outputs and menu functions.
