The Trek Model 2100 HF is a high-frequency, high-speed, wide bandwidth amplifier for high power applications. It incorporates an all-solid-state design for highly reliable low-noise operation, thus achieving accurate output response and high slew rates, even in highly capacitive loads. Full power frequency response of the amplifier is essentially flat up to 2 MHz. No overshoot or instability of the waveform occurs due to the amplifier’s unique dual feedback feature.
Features and Benefits
Incorporates all-solid state design for highly reliable lownoise operation
Achieves accurate output rates and high slew rates even in highly capacitive loads
Full power frequency response is essentially flat up to 2 MHz
Dual feed-back feature ensures “no overshoot” or instability of waveform
RoHS compliant
NIST-traceable Certificate of Compliance provided with each unit shipped
CE compliant
Model 2100HF Specifications
Performance
Output Voltage Range: 0 to ±150 V DC or peak AC
Output Current Range: 0 to ±300 mA DC
Input Voltage Range: 0 to ±3 V DC or peak AC
Input Impedance: 50W, nominal
DC Voltage Gain: 50 V/V
Offset Voltage: Less than ±100 mV
Output Noise: Less than 50 mV p-p
Slew Rate(10-90%): Greater than 2000 V/µs
Large Signal Bandwidth (-3dB): DC to greater than 2.6 MHz
Small Signal Bandwidth (-3dB): DC to greater than 3 MHz
Stability: Delay Time Less than 6 mV/ minute, noncumulative
Drift with Temp Less than 150 ns (input to output)
Mechanical
Dimensions: 141 mm H x 213 mm W 336 mm D (5.57” H x 8.38” W x 13.22” D)
Weight: 6.8 kg (15 lb)
HV Connector: BNC Connector
Electrical
Input Power: 90 to 127 V AC, at 48 to 63 Hz 180 to 250 V AC, at 48 to 63 Hz
Supplied Accessories
Operators’Manual PN: 23435
Line Cord (104 to 127 V AC operation) PN: N5002
Fuse, 2 A, 250 V Slow, 5 mm x 20 mm PN: H0014R
Line Cord (207 to 250 V AC operation) Line cord type determined by the geographical destination of the unit
Fuse, 2 A, 250 V Slow, 5 mm x 20 mm PN: H0013R
Optional Accessories
Optional Accessories:None