The Trek Model PZD350A is a high-voltage DC-stable piezo driver/amplifier designed to provide precise control of output voltages in bipolar or unipolar ranges that are customer specified within a range of available settings. It is configured as a noninverting amplifier with a variable DC gain. An inverting amplifier configuration is also available.
The unit features an all-solid-state design, a high slew rate and a four-quadrant active output stage which sinks or sources current into reactive or resistive loads throughout the output voltage range. This capability is essential for achieving the accurate output responses and high slew rates demanded by reactive loads.
Features and Benefits
Four-quadrant output for driving capacitive loads
Closed loop system for high accuracy
Short-circuit protected for equipment protection
All solid-state design for maintenance-free operation
DC-stable for programmable supply applications
Low output noise for ultra-accurate outputs
Model PZD350A M/S is also available with twice the current capability of the Model PZD350A
NIST-traceable Certificate of Calibration provided with each unit
CE complian
Model PZD350A
Specifications
Performance
Output Voltage Bipolar Range: 0 to ±350 V DC or peak AC
Output Voltage Unipolar Range:0 to +700 V DC or 0 to -700 V DC or peak AC
Output Current Bipolar Range: 0 to ±200 mA
Output Current Unipolar Range:0 to ±100 mA
Input Voltage Range: 0 to ±10 V DC or peak AC
Input Impedance: 90 kW, nominal (non-inverting) 1 MW nominal, (inverting)
DC Voltage Gain: 0 to 150 V/V
DC Voltage Gain Accuracy: Better than 0.1% for factory set gain of 100 V/V (input to output)
Offset Voltage: Less than ±500 mV
Output Noise (all ranges)*: Less than 100 mV rms to 20 kHz w/100 pF load
Less than 150 mV rms to 20 kHz with no load
Slew Rate (10% to 90%, typical): Bipolar: Greater than 550 V/µs
Unipolar: Greater than 440 v/µs
Large Signal Bandwidth (-3 dB): Bipolar: DC to greater than 250 kHz
Unipolar: DC to greater than 200 kHz
Large Signal Bandwidth(1% distortion): Bipolar: DC to greater than 90 kHz
Unipolar: DC to greater than 70 kHz
Small Signal Bandwidth (-3dB): Bipolar: DC to greater than 350 kHz
Unipolar: DC to greater than 250 kHz
Settling Time to 1%: Less than 30 µs when critically damped
Stability With a set gain of 100 V/V: Drift with Time Less than 50 ppm/hr, noncumulative
Drift with Temp Less than 100 ppm/°C
Voltage Monitor
Ratio: 1/100th of the high voltage output
Current Monitor
Ratio: 0.05 V/mA, ±1% of full scale
Features
Digital Enable: BNC connection for TTL compatible signal to turn ON/OFF the HV output for each channel
Gain Control: The gain of the Model PZD350A is adjustable to 150 V/V
Dynamic Adjustment:A graduated 1-turn front panel potentiometer is used to optimize the AC response of the for various load configurations output signal
Input Configuration: The input is configured as a noninverting amplifier. An inverting amplifier is also available
Limit Indicator: An amber indicator warns when the PZD350A fails to produce the required HV output
Automatic Power Limit: Automatically limits the internal power dissipation to protect the PZD350A from overheating
Mechanical
Dimension:
Single Channel: 110 mm H x 220 mm W x 445 mm D (4.3” H x 8.7” W x 17.5” D)
Dual Channel:110 mm H x 432 mm W 445 mm D (4.3” H x 17” W x 17.5” D)
Weight: Single 5 kg (11 lb) 10 kg (22 lb)
Dual 10 kg (22 lb)
HV Connector :SHV High Voltage Connector
Operating Conditions
Temperature: 0°C to 40°C (32°F to 104°F)
Relative Humidity: To 85%, noncondensing
Altitude: To 2000 meters (6561.68 ft.)
Electrical
Line Voltage: Factory Set for one of two ranges: 90 to 127 V AC or 180 to 250 V AC,either at 48 to 63 Hz
AC Line Receptacle: Standard 3-prong with integral fuse holder
Power Consumption: 90 VA, single channel 175 VA, dual channel Supplied
Accessories
HV Cable: 2 m, 66 pF per foot Operators’
Manual PN: 23432
HV Output Cable Assembly PN: 43874R cable and SHV mating connector
Line Cord, Fuses Selected per geographic destination
Ordering Information
90 to 127 V AC Model PZD350A-1-L (single unit)
90 to 127 V AC Model PZD350A-2-L (dual unit)
180 to 250 V AC Model PZD350A-1-H (single unit)
180 to 250 V AC Model PZD350A-2-H (dual unit)
Notes
The Model PZD350A comes from the factory with settings for an output voltage of ±350 V DC or peak AC, a voltage gain ratio of 100 V/V, with a noninverting input. Please specify voltage range (±350 V, +700 V, or -700 V) and input configuration (inverting or noninverting) when ordering. Also available is the Model PZD350A M/S with twice the current capability of the standard PZD350A.