Economical, indispensable tools for a variety of uses in engineering, design, trou ble shooƟng, or service.
These small, rugged subsƟtuters can saƟsfy most requirements.
Features:
• Direct reading — No fumbling with mulƟple slide or rotary
switches
The IET family of digital subsƟtuters uses convenient side-by-side
thumbwheel switches. Simply dial in the desired values and use.
• Standard accuracies of 1%, 0.1%, and 0.05% available.
• Broad choice of standard and opƟonal models.
A full line of standard subsƟtuters saƟsfies most re quire ments.
• Direct readings eliminate potenƟal mistakes that come from
rotary or slide-switch boxes.
• For easy value readings, ranges are separated by color
coded switches and numbers.
• The units are small, rugged, and portable.
• CombinaƟon units, such as Resistance and Capacitance
SubsƟtuter (RCS-500), are available.
Options:
• Shielded case with grounding post
• Panel mounƟng
• ProtecƟon fuse
*Accuracy:
After subtraction of residual impedance
Traceable to SI
**Accuracy for RS-201W & RS-201W-2W:
<10 MΩ: as shown above
≥10 MΩ: 0.2%
***Rating:
Subject to switch maximum dielectric strength of 750 Vdc peak
or 550 Vrms, switching
Switches:
10-position thumbwheel switches
make-before-break
Maximum switch voltage:
750 Vdc peak or 550 Vrms, switching
Mechanical:
A: 8.1 x 7.9 x 5.6 cm; 184 g (3.2" x 3.1" x 2.2"; 6.5 oz)
B: 12.1 x 7.9 x 5.6 cm; 235 g (4.7" x 3.1" x 2.2"; 8.3 oz)
C: 18.8 x 11.6 x 6 cm; 410 g (7.4" x 4.3" x 2.4"; 14 oz)